Inspections Spéciales Pour La Ville De New York

Le New York City Department of Buildings (DOB) exige des inspections spéciales pour s’assurer que toutes les exigences du Code de la construction de la ville de New York sont respectées. Bureau Veritas est une agence d’inspection spéciale agréée de classe 1 de la ville de New York, reconnue pour son éthique, son intégrité et sa réputation sur le marché. Nous avons effectué des inspections spéciales pour de nouveaux bâtiments et de grands projets privés pour des clients tels que des développeurs, des sociétés de génie et des entrepreneurs, ainsi que des organismes publics de la ville de New York. Le NYC Department of Design and Construction, la NYC Housing Authority et la Port Authority of NY/NJ ne sont que quelques-uns de nos clients satisfaits.

PRINCIPAUX AVANTAGES DES INSPECTIONS SPÉCIALES ET DES ESSAIS DE MATÉRIAUX DE BV

Autorisé à effectuer les 57 inspections requises par le DOB de la ville de New York
Accréditation complète de l’IAS pour les 57 catégories d’inspections du DOB
Historique des opérateurs peu scrupuleux sur le marché
Surveillance AQ/CQ pour l’acier de construction, le béton et la stabilité des structures
Fournisseur d’essais de matériaux de construction (CMT)

Contactez-nous

Key Facts:

Full IAS Accreditation as a Special Inspection Agency
NYC DOB Class 1 Licensed Special Inspections Agency
AASHTO Accredited (CMT)
CCRL Inspected (CMT)
NYC DOB Licensed Concrete Testing Laboratory
ISO Certified (9001, 14001, 18001)
Bureau Veritas is fully accredited and licensed to provide every inspection as outlined by chapter 17 of the IBC & NYCBC which include the following:

NYC Building Code Inspections (NYCBC)

1704.3.1 – Structural Steel Welding
1704.3.2 – Structural Steel Details
1704.3.3 – Structural Steel High Strength Bolting
1704.3.4 – Structural Cold-Formed Steel
1704.4 – Concrete Cast In Place
1905.6 – Concrete Sampling & Testing
1704.4 – Concrete Pre-Cast
1704.4 – Concrete Pre-Stressed
1704.5 – Masonry
1704.6.1 – Wood: Installation of High Load Diaphragms
1704.6.2 – Wood: Installation of Metal Plate Connected Trusses
1704.6.3 – Wood: Installation of Prefabricated I-Joists
1704.7.1 – Subgrade
1704.7.2 – Subsurface Conditions: Fill Placement
1704.7.3 – Subsurface Conditions: In-Place Density
1704.8 – Deep foundation Elements
1704.8.5 – Helical Piles
1704.9 – Vertical Masonry Foundation Elements
1704.10 – Wall Panels, Curtain Wall, & Veneers
1704.11 – Sprayed Fire-Resistant Materials
1704.12 – Mastic & Intumescent Fire-Resistant Coatings
1704.13 – Exterior Insulation Finish Systems (EIFS)
1704.14 – Alternative Materials
1704.15 – Smoke Control Systems
1704.16 – Mechanical Systems
1704.17 – Fuel Oil Storage & Fuel Oil Piping Systems
1704.18 – High-Pressure Steam Piping (Welding)
1704.18 – High-Temperature Hot Water Piping (Welding)
1704.19 – High-Pressure Fuel Gas Pipe Piping (Welding)

1704.20.1 – Structural Stability (Existing Buildings)
1704.20.2 – Excavation Sheeting, Shoring, & Bracing
1704.20.3 – Underpinning
1704.20.4 – Mechanical Demolition
1704.20.5 – Raising & Moving of a Building
1704.21.1.2 – Soil Percolation Test – Private On-Site Storm Water Drainage Disposal Systems, & Detention Facilities
1704.21.2 – Private On-Site Storm Water Drainage Disposal Systems, & Detention Facilities Installation
1704.22 – Individual On-Site Private Sewage Disposal Systems Installation
1704.22 – Soil Percolation Test – Individual On-Site Private Sewage Disposal systems
1704.23 – Sprinkler Systems
1704.24 – Standpipe Systems
1704.25 – Heating Systems
1704.26 – Chimneys
1704.27 – Fire Resistant Penetrations & Joints
1704.28 – Aluminum Welding
1704.29 – Flood Zone Compliance
1704.30 – Luminous Egress Path M
1704.31 – Emergency & Standby Power Systems (Generators)
1704.32 – Post Installed Anchors
1707.8 – Seismic Isolation Systems
1707.8 – Seismic Isolation Systems
110.2 – Preliminary
110.3.1 – Footings & Foundations
110.3.2 – Lowest floor Elevation
110.3.3 – Structural Wood Frame
110.3.4 – Fire Resistance Rated Construction
110.3.5 – Energy Code Compliance
28-116.2.2 – Public Assembly Emergency Lighting
110.5 & Dir. 14 – Final

International Building Code Inspections (IBC)

1705.1 - Special Cases
1705.2 - Steel Construction
1705.3 - Concrete Construction
1705.4 - Masonry Construction
1705.5 - Wood Construction
1705.6 – Soils
1705.7 - Deep Driven Foundations
1705.8 - Cast In Place Deep Foundations
1705.9 - Helical Pile Foundations
1705.10 - Fabricated Items

1705.11 - Special Inspections For Wind Resistance
1705.12 - Special Inspections For Seismic Resistance
1705.13 - Testing for Seismic Resistance
1705.14 - Sprayed Fire-Resistant Materials (SFRM)
1705.15 - Mastic & Intumescent Fire-Resistant Coatings
1705.16 - Exterior Insulation Finish Systems (EIFS)
1705.17 - Fire Resistant Penetrations & Joints
1705.18 - Testing for Smoke Control